index

H-Flow High-Pressure Pump H80-4S

H-Flow High-Pressure Pump H80-4S

Regular price $12,279.99

Shipping calculated at checkout

Wishlist

Brand: Crystal Quest Water Filters

Type:

Sku: SWP-H80B4

Available : Instock

Sold by HomeNKitchenShop, an authorized reseller.

Returns accepted within 30 days | support@homenkitchenshop.com

✓ Verified

Shipping Information

Shipping calculated at checkout

Shipping cost and estimated delivery will be shown at checkout based on your location.

Processing Time: 3–5 business days
Tracking number sent via email once dispatched

Returns & Refund

Returns accepted within 30 days of delivery.

Damaged or Defective Item

Free return shipping + replacement or full refund

Wrong Item Received

Free return shipping + replacement or full refund

Change of Mind

Return shipping at customer's expense · Item must be unused, unwashed & in original packaging

All returns require a Return Authorization (RA) number before sending.

To initiate a return, contact us:

support@homenkitchenshop.com +1 832-730-5801

View Full Return & Refund Policy

Safety & Compliance

Some products sold on this website may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

www.P65Warnings.ca.gov

Always follow manufacturer instructions for use, cleaning, and maximum temperature ratings. Do not use cookware or utensils that are cracked, chipped, or damaged.

Keep sharp kitchen tools out of reach of children. Use heat-resistant gloves when handling hot items.

Colors and finishes may vary slightly from product images due to screen settings and natural material differences. Follow care instructions to maintain product quality and longevity.

Not all products are suitable for outdoor use unless explicitly stated.

Secure payment

Guarantee safe checkout

H-Flow High-Pressure Pump H80-4S

$12,279.99

Product Description

The H-Flow High-Pressure Pump H80-4S is a high-capacity, robust pump engineered for industrial, commercial, and agricultural applications. Powered by a 5HP motor, this pump delivers reliable performance and exceptional efficiency for demanding environments requiring consistent water flow and pressure.

###

H-Flow High-Pressure Pump H80-4S

Cast Iron / Stainless Steel – 80 GPM – 4 Stage – 5 HP / 1 Phase

Technical Specifications
Model	H-Flow High-Pressure Pump H80-4S
Nominal Flow Rate	80 GPM
Stages	4
Motor RPM	3500 RPM
Motor Frame	NEMA JM Frame Motor (C-Face)
HP Rating	5 HP
Phase / Hertz	1 PH / 60 Hz
Inlet	1½″ FNPT
App. Dimensions (A x B)	19.70″ x 12.97″
App. Weight (lb)	141

###

Construction & Design Features

Component	Description
Inlet / Motor Bracket	Cast Iron
Discharge Housing	Steel
Pump Housing	304 Stainless Steel Tubing
Impellers	Noryl
Diffusers	Noryl
Wear Rings	316 Stainless Steel
Shaft & Coupling	316 Stainless Steel / 415 Stainless Steel
Shaft Bearing Sleeve	316 Stainless Steel
Shaft Bearing	Bronze
Mechanical Seal	Carbon/Ceramic
Mechanical Seal Spacer	416 Stainless Steel
O-Rings	Buna-N

###

Installation Manual

Installation Instructions

Preparation:
- Inspect the pump for any damage and verify that all components are included.
- Ensure the motor voltage matches the power supply specifications.
- Check the alignment of the pump and motor before installation.
Foundation:
- Mount the pump on a flat, stable surface to reduce vibrations during operation.
- Secure the pump using anchor bolts to ensure stability.
Piping Connections:
- Connect suction and discharge pipes using appropriate gaskets and seals.
- Support the piping to prevent stress on the pump connections.
- Install a check valve and isolation valve on the discharge side for operational control.
Priming the Pump:
- Fill the pump casing with liquid to ensure proper priming before starting.
- Use the vent valve to eliminate trapped air in the pump casing.
Electrical Wiring:
- Wire the motor according to local electrical codes and safety standards.
- Ensure the motor is properly grounded for safe operation.
- Verify that the motor rotation matches the direction indicated on the pump casing.
Startup:
- Fully open the suction and discharge valves before starting the pump.
- Start the motor and observe the pump for any irregularities.
- Check for leaks, vibrations, or unusual noises during startup.
Final Adjustments:
- Adjust the flow and pressure as needed using the discharge valve.
- Avoid throttling the suction side to maintain pump efficiency.
Regular Maintenance:
- Periodically inspect the pump and motor for wear or damage.
- Lubricate bearings and other components as per the manufacturer’s recommendations.

###

Adjust text colors

Adjust heading colors

Adjust background colors